| Option
Descriptions |
007 |
Analog ramp sweep |
| 0BW |
Printed copy of the assembly-level service guide |
| 1CM |
Rackmount flange kit |
| 1CN |
Front handle kit |
| 1CP |
Rackmount flange and front handle kit |
| 1E1 |
Step attenuator |
| 1EA |
High output power |
| 1ED |
Type-N (f) RF output connector |
| 1EH |
Improved harmonics below 2 GHz |
| 1EM |
Moves all front panel connectors to the rear panel |
| 1EZ |
Extended Support Life |
| 520 |
Frequency range from 250 kHz to 20 GHz |
| 532 |
Frequency range from 250 kHz to 31.8 GHz |
| 540 |
Frequency range from 250 kHz to 40 GHz |
| 550 |
Frequency range from 250 kHz to 50 GHz |
| 567 |
Frequency range from 250 kHz to 67 GHz |
| 707 |
Standard adapter set, 3.5mm F to 3.5mm F |
| 708 |
Standard adapter set, type-N M to 3.5mm F |
| 709 |
Standard adapter set, 2.4 mm |
| 710 |
Standard adapter set, 1.85mm F to 1.85mm F |
| 881 |
Analog Modulation Suite - includes step attenuator, AM, FM, phase modulation, scan modulation, low frequency generator and narrow pulse modulation |
| AB2 |
Chinese E8257D PSG signal generators user's guide |
| ABA |
Printed copy of the English documentation set |
| ABD |
German E8257D PSG Signal Generators User's Guide Option |
| ABJ |
Japan E8257D PSG Signal Generators User's Guide Option |
| C09 |
Moves all connectors to rear panel except for RF output |
| CD1 |
CD-ROM containing the English documentation set |
| H1K |
100 kHz frequency extension |
| H1S |
Provides 1 GHz IN & OUT on rear panel to improve Phase Noise performance |
| H20 |
20 dBm maximum RF output power for CW frequencies 3.2 GHz to 20 GHz, at temperature of 25degC, for instruments with opts 520,1EA,1E1 |
| H23 |
+23 dbm power output for frequencies 9GHz, 25degC, option 520,1EA,1E1 |
| H30 |
RF upconverter |
| H42 |
Provides a unique firmware revision and Preset condition |
| H43 |
US Air Force TISS program |
| H44 |
Frequency range from 250 kHz to 43.5 GHz |
| H5K |
Provides inverted EXT1 input with 5000-ohm input impedance instead of 600 ohms |
| H60 |
Provides 65 GHz mixer with connections on rear panel |
| H65 |
Provides M9D-2065LNV mixer with two 2.4mm F connections on rear panel. RF 65GHz, LO 30GHz with doubler, 22GHz IF |
| HA1 |
Improved Phase Noise performance for AFMETCAL |
| HA2 |
Specified integrate phase noise for CW at 8.5GHz with offset from 10Hz to 1MHz |
| HA7 |
Provides plots of phase noise at 16GHz and 18GHz, and a plot of 2nd harmonics |
| HAR |
Improved Phase Noise Below 500 MHz |
| HCC |
Provides 250MHz - 10GHz In and Out on the rear panel |
| HE1 |
AFMETCAL SSG special |
| HEU |
High output power for frequency below 3.2 GHz |
| HNS |
Narrow pulse modulation to 31.8 GHz |
| HSM |
Provides scan mod to the E8257D |
| K45 |
24 inch rack mount slide kit with flange and brackets |
| RMKT |
Agilent refurbished product |
| UK6 |
Commercial calibration certificate and test data |
| UN5 |
Standard output power |
| UNC |
Standard connector, 3.5 mm |
| UND |
Standard connector, 2.4 mm |
| UNE |
Standard connector, 1.85 mm |
| UNF |
No pulse modulation |
| UNG |
No AM, FM, and phase modulation |
| UNM |
Standard front and rear panel connector configuration |
| UNN |
No step attenuator |
| UNP |
Standard spectral purity |
| UNR |
Enhanced phase noise performance |
| UNT |
AM, FM, phase modulation, and LF output |
| UNU |
Pulse modulation |
| UNW |
Narrow pulse modulation |
| UNX |
Ultra-low phase noise performance |
