| Option
Descriptions |
001 |
Internal baseband generator (8 Msamples memory) |
| 002 |
Internal baseband generator (32 Msamples memory) |
| 003 |
Enables ESG digital output connectivity with N5102A |
| 004 |
Enables ESG digital input connectivity with N5102A |
| 005 |
6 Gbyte hard drive |
| 0BV |
Service documentation, component level |
| 0BW |
Service documentation, assembly level |
| 1CM |
Rack mount without handle |
| 1CN |
Handle kit |
| 1CP |
Rackmount kit with front handles |
| 1E5 |
High-stability time-base |
| 1EM |
Moves all front panel connectors to rear panel |
| 221 |
Waveform 5-pack1 |
| 222 |
Waveform 5-pack2 |
| 223 |
Waveform 5-pack3 |
| 224 |
Waveform 5-pack4 |
| 225 |
Waveform 5-pack5 |
| 226 |
Waveform 5-pack6 |
| 227 |
Waveform 5-pack7 |
| 228 |
Waveform 5-pack8 |
| 229 |
Waveform 5-pack9 |
| 300 |
GSM/EDGE Base-station Loop-back test capability |
| 400 |
3GPP WCDMA (FDD) personalities |
| 401 |
cdma2000 and IS-95-A personalities |
| 402 |
TDMA personalities (GSM, EDGE, NADC, PDC, PHS, DECT, TETRA) |
| 403 |
Calibrated noise personalities |
| 404 |
1XEV-DO signal studio software |
| 406 |
Bluetooth signal studio software |
| 407 |
Signal Studio for S-DMB |
| 408 |
Signal studio for enhanced multitone |
| 409 |
GPS personality |
| 411 |
TD-SCDMA (TSM) signal studio software |
| 414 |
Signal studio for 1xEV-DV and cdma 2000 |
| 417 |
Signal studio for 802.11 WLAN |
| 418 |
Signal studio for HSDPA over W-CDMA |
| 419 |
Signal Studio for 3GPP W-CDMA HSPA |
| 420 |
Signal studio for pulse building |
| 421 |
Signal studio for noise power ratio (NPR) |
| 501 |
250kHz to 1 GHz |
| 502 |
250kHz to 2 GHz |
| 503 |
250kHz to 3 GHz |
| 504 |
250kHz to 4 GHz |
| 506 |
250kHz to 6 GHz |
| 601 |
Internal baseband generator, 8 Msa memory with digital bus capability |
| 602 |
Internal baseband generator, 64 Msa memory with digital bus capability |
| 701 |
Standard Chassis |
| 702 |
IEM Chassis |
| 703 |
UN7 Chassis |
| 704 |
UNB Chassis |
| 705 |
Standard and 005 chassis |
| 706 |
1EM and 005 chassis |
| 707 |
UN7 and 005 chassis |
| 708 |
UNB and 005 chassis |
| 709 |
UN7 and 300 Chassis |
| 710 |
UN7 and 300 and 005 Chassis |
| 711 |
UN7 and UNB Chassis |
| 712 |
UN7 and UNB and 005 Chassis |
| 713 |
506 and UN7 Chassis |
| 714 |
506 and UN7 and 005 Chassis |
| 715 |
506 Chassis |
| 716 |
506 and 005 Chassis |
| 717 |
1EM and UN7 and 300 Chassis |
| 718 |
1EM and UN7 and 300 and 005 Chassis |
| 719 |
1EM and UN7 Chassis |
| 720 |
1EM and UN7 and 005 Chassis |
| 730 |
MATERIAL FOR UNM + HCC |
| 731 |
MATERIAL FOR 1EM + HCC |
| 791 |
Implied by E4438C-OC-SOFTWR |
| 792 |
Implied by E4438C-300 |
| AB0 |
Taiwan - Chinese localization |
| AB1 |
Korea - Korean localization |
| AB2 |
China - Chinese localization |
| ABA |
United States - English documentation set |
| ABF |
France - French localization |
| ABJ |
Japan - Japanese localization |
| D01 |
Hardware option for E4438C |
| D02 |
Hardware option for E4438C |
| D03 |
Hardware option for E4438C |
| D04 |
Hardware option for E4438C |
| D05 |
Hardware option for E4438C |
| D06 |
Hardware option for E4438C |
| D07 |
Hardware option for E4438C; 503,1EM,UNB,UNP,1E5 |
| D08 |
Hardware option for E4438C; 503,1EM,UNB,UNJ,1E5 |
| D09 |
Hardware option for E4438C; 504,UNM,UNN,UNP,1E5 |
| D10 |
Hardware option for E4438C; 504,UNM,UNN,UNJ,1E5 |
| D11 |
Hardware option for E4438C; 504,UNM,UNB,UNP,1E5 |
| D12 |
Hardware option for E4438C; 504,UNM,UNB,UNJ,1E5 |
| D13 |
Hardware option for E4438C (504/1EM/UNN/UNP/1E5) |
| D14 |
Hardware option for E4438C (504/1EM/UNN/UNJ/1E5) |
| D15 |
Hardware option for E4438C (504/1EM/UNB/UNP/1E5) |
| D16 |
Hardware option for E4438C (504/1EM/UNB/UNJ/1E5) |
| D17 |
Hardware option for E4438C (506/UNM/UNB/UNJ/1E5) |
| D18 |
Hardware option for E4438C (506/1EM/UNB/UNJ/1E5) |
| H08 |
enchancement to E4438C-408 |
| H13 |
Enables option 413 (Pre-release signal studio for WiMAX personality) for the E4438C |
| H14 |
Improved Phase Noise performance for a specific frequency |
| H16 |
Warranted +16dBm maximum leveled RF output over 250MHz to 3GHz with option 506 |
| H20 |
Signal studio for pulse building for the E8267C opt. 420 to operate in the E4438C |
| H25 |
Extends the lower limit to Swept-Sine frequency to 25 MHz for LF Out |
| H3V |
Increases the I/Q output voltage from 1.5V pk-pk to 3.0V pk-pk for the E4438C |
| H58 |
Provide ACLR <= 58db for multi-carrier WCDMA |
| HA3 |
Tested 100 Hz phase noise at 6 GHz and 100 Hz spurs at 5.18 GHz |
| HA6 |
Provide ACLR less than= - 60dbc for muti-carrier WCDMA |
| HA7 |
Specify Non-harmonics for frequency 136 MHz to 174 MHz to be less than -75 dBc |
| HBC |
Provides frequency from 4GHz up to 6GHz In and Out on the rear panel |
| HCC |
Provides 250MHz to 4GHz in & out on the rear panel |
| HDS |
Provides synchronized DSIM device clock |
| HEC |
Provides external BBG clock input on rear panel |
| HF8 |
Extends the Frequency to 6.5 GHz for the E4438C with unspecified performance |
| HM3 |
2nd BaseBand Generator, 8 MSA Memory with I/Q summing ratio and freq offset. |
| HM4 |
2nd BaseBand Generator, 64 MSA Memory with I/Q summing ratio and freq offset. |
| HP3 |
Second internal baseband generator for polar modulation with synchronization between two baseband generators, 8 Msa memory |
| HP4 |
Second internal baseband generator for polar modulation with synchronization between two baseband generators, 64 Msa memory |
| LIC |
License CD-ROM |
| QUO |
N7617B-1FP 802.11 WLAN - connect to E4438C signal generator, fixed, perpetual license |
| RMKT |
Agilent refurbished product |
| SK1 |
SW KIT- SW CD |
| SK2 |
SW KIT- SW CD, Pre-Installed SW LIC Notice |
| SP1 |
Provides jitter injection for signal studio software |
| SP2 |
Provides dynamic sequencing capability in the E4438C |
| UK6 |
Commercial calibration certificate with test data |
| UN7 |
Internal Bit Error Rate analyzer |
| UNB |
High output power with mechanical attenuator |
| UNJ |
Enhanced phase noise performance |
| UNM |
Standard front and rear panel connector configuration |
| UNN |
Standard output power with electronic attenuator |
